Hand Removal Without Casualties
作者: Funny Items
发布时间: 2026-08-26 03:05:08
查看数: 67
Removing Hands Without Damage
Hand removal precedes most dial swaps. Done clumsily, it bends hands or scratches dials. Here are the safe techniques.
Method 1: Hand Remover Tool
The purpose-built option — a lever tool that pulls each hand straight up off its post:
- Protect the dial with a plastic film or dial protector
- Position the puller legs under the hand evenly
- Turn the top screw slowly — the hand lifts straight off
- Repeat for minute and second hands
Method 2: Lever Blades (Budget)
Two fine levers worked from opposite sides under the hand:
- Work both blades gently under the hand base
- Alternate tiny upward pressure side to side
- The hand walks up the post gradually — patience over force
Rules That Prevent Damage
| Rule | Why |
|---|---|
| Hands off only at 12:00? No — removal position doesn't matter | Common myth; pressing matters, removal doesn't |
| Never pry against the dial surface | Blades scratch printed faces permanently |
| Store removed hands lume-side up | Lume surfaces mark easily — see our storage guide |
Reinstallation technique in our hands replacement guide.
Frequently Asked Questions
Second hand stuck hard?
It sits tightest. Ensure both blades are fully under its base before levering — half-engaged blades bend the hand.