Press Dies: The Contact Rules
作者: Funny Items
发布时间: 2026-08-26 06:08:27
查看数: 114
Dies Make the Press
A crystal press without correct dies is a crystal crusher. Here is how die selection actually works.
Die Anatomy
- Lower dies: support the caseback — choose one matching your case diameter so pressure distributes across the back, not the crystal area
- Upper dies: press against the crystal — the critical selection
Upper Die Selection Rules
| Crystal Type | Correct Die |
|---|---|
| Flat sapphire/mineral | Flat-faced die slightly smaller than crystal diameter |
| Domed crystals | Ring-shaped or concave die contacting only the edge zone |
| Acrylic tension-fit | Wide flat die pressing on tension ring |
The Contact Rule
Pressure must land on the crystal's rigid edge zone — never its center dome. Center pressure on domed sapphire is how cracks happen (see failure stories in our lessons guide).
Sourcing Dies
- Press kits include common sizes; measure your crystal before ordering extras
- Cloth between die and crystal prevents polish scratches — thin layer only, it doesn't affect seal
Full press usage in our press guide.
Frequently Asked Questions
Universal die kits worth it?
Yes — the range of sizes covers nearly every consumer crystal you'll encounter.